## Category: R glm subset

GLM in R is a class of regression models that supports non-normal distributions, and can be implemented in R through glm function that takes various parameters, and allowing user to apply various regression models like logistic, poission etc. Here Family types include model types includes binomial, Poisson, Gaussian, gamma, quasi. Each distribution performs a different usage and can be used in either classification and prediction. And when the model is gaussian, the response should be a real integer.

Here we shall see how to create an easy generalized linear model with binary data using glm function. And by continuing with Trees data set. Number of Fisher Scoring iterations: 2 The output of the summary function gives out the calls, coefficients, and residuals. The above response figures out that both height and girth co-efficient are non-significant as the probability of them are less than 0.

And there is two variant of deviance named null and residual. Finally, fisher scoring is an algorithm that solves maximum likelihood issues. With binomial, the response is a vector or matrix.

And to get the detailed information of the fit summary is used. Next, we refer to the count response variable to modeled a good response fit.

To calculate this, we will use the USAccDeath dataset. Let us enter the following snippets in the R console and see how the year count and year square is performed on them. Number of Fisher Scoring iterations: 4 To verify the best of fit of the model the following command can be used to find.

They can be analyzed by precision and recall ratio. Next step is to verify residuals variance is proportional to the mean. Then we can plot using ROCR library to improve the model. Therefore, we have focussed on special model called generalized linear model which helps in focussing and estimating the model parameters. It is primarily the potential for a continuous response variable.This is a generic function, with methods supplied for matrices, data frames and vectors including lists.

Packages and users can add further methods. For data frames, the subset argument works on the rows. Note that subset will be evaluated in the data frame, so columns can be referred to by name as variables in the expression see the examples.

The select argument exists only for the methods for data frames and matrices.

It works by first replacing column names in the selection expression with the corresponding column numbers in the data frame and then using the resulting integer vector to index the columns. This allows the use of the standard indexing conventions so that for example ranges of columns can be specified easily, or single columns can be dropped see the examples. The drop argument is passed on to the indexing method for matrices and data frames: note that the default for matrices is different from that for indexing.

Factors may have empty levels after subsetting; unused levels are not automatically removed. See droplevels for a way to drop all unused levels from a data frame.

An object similar to x contain just the selected elements for a vectorrows and columns for a matrix or data frameand so on. This is a convenience function intended for use interactively. For programming it is better to use the standard subsetting functions like [and in particular the non-standard evaluation of argument subset can have unanticipated consequences.

Created by DataCamp. Subsetting Vectors, Matrices and Data Frames Return subsets of vectors, matrices or data frames which meet conditions. Community examples mithraandiir at May 2, base v3. Post a new example: Submit your example. API documentation. Put your R skills to the test Start Now.By using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service.

Cross Validated is a question and answer site for people interested in statistics, machine learning, data analysis, data mining, and data visualization.

It only takes a minute to sign up. But to fit the model I would like to add d as a Covariate which has only an Impact on three Levels of the Z. Sign up to join this community. The best answers are voted up and rise to the top.

Home Questions Tags Users Unanswered. Asked 4 days ago. Active 4 days ago. Viewed 6 times. Does anyone knows if there is a function in R to run the model in this way. Thank you a lot for helping and Kind regards, Julia.

### Subset Data Frame Rows by Logical Condition in R (5 Examples)

Post as a guest Name. Email Required, but never shown. Upcoming Events. Featured on Meta. Responding to the Lavender Letter and commitments moving forward.

I am resigning as a moderator. Related Hot Network Questions. Question feed.By using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service. Stack Overflow for Teams is a private, secure spot for you and your coworkers to find and share information.

I realize that it may be difficult to answer this without seeing my data, but any general help on what may be causing my problem would be greatly appreciated. Because you haven't named the argument, R is interpreting it as the weights argument which is the next argument after data.

Learn more. Asked 6 years, 9 months ago. Active 6 years, 9 months ago. Viewed 5k times. I have a GLM Logit regression that works correctly, but when I add a subset argument to the GLM command, I get the following error: invalid type list for variable ' weights '.

## Issue with subset in glm

Podcast Ben answers his first question on Stack Overflow.Best subset selection using 'leaps' algorithm Furnival and Wilson, or complete enumeration Morgan and Tatar, Complete enumeration is used for the non-Gaussian and for the case where the input matrix contains factor variables with more than 2 levels. One of the glm distribution functions. The glm function is not used in the Gaussian case.

Instead for efficiency either 'leaps' is used or when factor variables are present with more than 2 levels, 'lm' may be used.

The default value of the parameter may be changed by changing t. Note that the number of repetitions can be changed using t. Default TRUE means the intercept term is always included. When the function 'glm' is used, the log-likelihood, logL, is obtained using 'logLik'.

The argument t also controls the number of replications used when the delete-d CV is used as default. In this case, the parameter d is chosen using the formula recommended by Shao See CVd for more details. In the binomial GLM, nonlogistic, case the last two columns of Xy are the counts of 'success' and 'failures'. Cross-validation may also be used to select the best subset.

Cross-validation is not available when there are categorical variables since in this case it is likely that the training sample may not contain all levels and in this case we can't predict the response in the validation sample.

Usually it is a good idea to keep the intercept term even if it is not significant. See discussion in vignette. Cross-validation is not available for models with no intercept term or when force. The range of q for an equivalent BICq model is given. In the case of categorical variables with more than 2 levels, the degrees of freedom are also shown. Table showing range of q for choosing each possible subset size. Chen, J. Biometrika Furnival, G. Regressions by Leaps and Bounds.

Technometrics, 16, Morgan, J. Technometrics 14, Shao, Jun Statistica Sinica 7, Created by DataCamp. Community examples Looks like there are no examples yet. Post a new example: Submit your example.

API documentation. Put your R skills to the test Start Now.For glm this can be a character string naming a family function, a family function or the result of a call to a family function.

For glm. See family for details of family functions. If not found in datathe variables are taken from environment formulatypically the environment from which glm is called.

Should be NULL or a numeric vector. The default is set by the na. Another possible value is NULLno action. Value na. This should be NULL or a numeric vector of length equal to the number of cases. One or more offset terms can be included in the formula instead or as well, and if more than one is specified their sum is used. See model. The default method "glm. User-supplied fitting functions can be supplied either as a function or a character string naming a function, with a function which takes the same arguments as glm.

If specified as a character string it is looked up from within the stats namespace. For glm : logical values indicating whether the response vector and model matrix used in the fitting process should be returned as components of the returned value. Type of weights to extract from the fitted model object.

Can be abbreviated. For glm : arguments to be used to form the default control argument if it is not supplied directly. For binomial and quasibinomial families the response can also be specified as a factor when the first level denotes failure and all others success or as a two-column matrix with the columns giving the numbers of successes and failures. A specification of the form first:second indicates the set of terms obtained by taking the interactions of all terms in first with all terms in second.

The terms in the formula will be re-ordered so that main effects come first, followed by the interactions, all second-order, all third-order and so on: to avoid this pass a terms object as the formula.

For a binomial GLM prior weights are used to give the number of trials when the response is the proportion of successes: they would rarely be used for a Poisson GLM. If more than one of etastartstart and mustart is specified, the first in the list will be used. It is often advisable to supply starting values for a quasi family, and also for families with unusual links such as gaussian "log".

All of weightssubsetoffsetetastart and mustart are evaluated in the same way as variables in formulathat is first in data and then in the environment of formula.

See later in this section. If a non-standard method is used, the object will also inherit from the class if any returned by that function.

Lecture60 (Data2Decision) Generalized Linear Modeling in R

The function summary i. The generic accessor functions coefficientseffectsfitted. Since cases with zero weights are omitted, their working residuals are NA. Where sensible, the constant is chosen so that a saturated model has deviance zero. A version of Akaike's An Information Criterionminus twice the maximized log-likelihood plus twice the number of parameters, computed via the aic component of the family. For binomial and Poison families the dispersion is fixed at one and the number of parameters is the number of coefficients.

For gaussian, Gamma and inverse gaussian families the dispersion is estimated from the residual deviance, and the number of parameters is the number of coefficients plus one. For a gaussian family the MLE of the dispersion is used so this is a valid value of AIC, but for Gamma and inverse gaussian families it is not. For families fitted by quasi-likelihood the value is NA.By using our site, you acknowledge that you have read and understand our Cookie PolicyPrivacy Policyand our Terms of Service.

Cross Validated is a question and answer site for people interested in statistics, machine learning, data analysis, data mining, and data visualization. It only takes a minute to sign up. I am fitting a binomial family glm in R, and I have a whole troupe of explanatory variables, and I need to find the best R-squared as a measure is fine.

Short of writing a script to loop through random different combinations of the explanatory variables and then recording which performs the best, I really don't know what to do. And the leaps function from package leaps does not seem to do logistic regression. Stepwise and "all subsets" methods are generally bad. Logistic regression is estimated by maximum likelihood method, so leaps is not used directly here. An extension of leaps to glm functions is the bestglm package as usually recommendation follows, consult vignettes there.

You may be also interested in the article by David W. One idea would be to use a random forest and then use the variable importance measures it outputs to choose your best 8 variables.

Another idea would be to use the "boruta" package to repeat this process a few hundred times to find the 8 variables that are consistently most important to the model. Sign up to join this community. The best answers are voted up and rise to the top. Home Questions Tags Users Unanswered. How to do logistic regression subset selection? Ask Question. Asked 9 years, 7 months ago.

Active 8 months ago. Viewed 44k times. Any help or suggestions would be greatly appreciated. Glorfindel 1 1 gold badge 8 8 silver badges 15 15 bronze badges. Leendert Leendert 1 1 gold badge 5 5 silver badges 4 4 bronze badges. You should have a look at the step function. Section 5.

I have 35 26 significant explanatory variables in my logistic regression model. I need the best possible combination of 8, not the best subset, and at no point was I interested in a stepwise or all subsets style approach. There is no wiggle room in this 8. I just thought someone may have know how I could fit all combinations of 8 explantory variables and it could tell me which maximises the likelihood sorry about the R-squared brain fart but AIC isnt relevant either since I have a fixed number of parameters, 8.

I'm sure mpiktas was of good intention when trying to improve its appearance and just didn't notice the No. In the end I used many different thing in the hope they would all give similar answers. And they did. I used the BMA, bestglm and glmnet packages as well as the step function. All the experts in the field around me seemed very content with the variables, and felt that it was quite progressive.